The ultimate in repositionable signage, our custom wall decals are a great option for in-store graphics, bedroom walls and office decor. Design your own decal and when you're ready to change things up, just peel your vinyl decals off the wall and stick them elsewhere or store them for future use. Our adhesive decals won't damage paint or drywall, so you can feel confident putting them up just about anywhere.
Installation: Remove all residue and dirt from the wall with mild soap and water. Make sure the decals have been brought up to room temperature before installing. Install on a smooth surface by starting at the top edge of the graphic and working your way down, slowly removing the backing as you go.
Care: To clean your wall decals, gently wipe them with a damp cloth, making sure not to saturate the adhesive side with water. You can peel the decals off the wall for storage. Store them at room temperature with 50% or less humidity for up to a year. To avoid creasing, do not roll them too tightly or lay heavy objects on your decals. Wall decals can tear with excessive tension.
Weight: .19lbs per square foot (about the weight of 20 quarters)
Thickness: .013" (about the thickness of 3 sheets of copy paper)
Details: Opaque white, low-tac, repositionable, easy to install
Uses: Indoor. Retail, home or office walls
Print Method: Four color process, eco-friendly, weather, fade and abrasion resistant UV ink
Estimated Lifespan: 5+ years with proper placement and care
Common Sizes: 12"x12", 24"x12", 2'x2', 4'x4', 3'x5'
Our vinyl wall decals are intended for interior use. Any kind of exterior usage will result in a shortened lifespan and potentially a ruined product if not placed on a proper surface.
For interior use the decal will work on any smooth and non-porous surface. This includes some lightly textured walls as well as painted drywall, glass, plastic, tile, smooth metal, sealed concrete and finished wood. Extremely unsmooth, textured (stucco, brick, concrete blocks, etc.) or porous walls or materials (fabric, canvas) will not work due to the inability for the adhesive backing to stick to the surface or because air or drafts will weaken the adhesive over time.
The wall decals are made with a low tack adhesive that allows for both removal and reuse on a regular basis. Peeling away or repositioning your decal is extremely easy and doesn’t leave behind any residual adhesive like a normal sticker would. Notwithstanding, like any sticker or adhesive the tackiness will wear with time and with frequent repositioning. The maintenance and care of the decal itself will also impact how many times it can be removed and reused. This is detailed below in the “Installation & Care” section.
If you intend to reuse your decal after storage we recommend using the original backing to store the decal. This backing will help keep the adhesive side of the decal from getting dirty or sticking to another property (or itself!) during storage. Using this original backing will allow you to remove, store and reuse your wall decal in the same position or different locations over time.
Simply pick a corner and peel away from the wall or surface where it is applied. If your decal has been contour cut, pay particular attention to areas where the decal is thin. Peel it up slowly and carefully in order to avoid any tearing or stretching. If you intend on storing the decal make sure to have your backing laid out before you remove the decal from the wall. Then place the decal on to the backing.
If your decal has been in place for an extended period, or on a less porous surface, you may need heat to remove it. The easiest way to do so is to use a blow dryer to heat up the decal and then peel it away.
Installation & Care
The installation of your decal first requires you to clean the surface and allow it to air dry where it will be applied. Cleaning this surface of any residual dirt, grease or grime will help the decal to adhere better to the surface. Clean the surface with a mild cleaner or in most cases a rag wet with water will be sufficient. Assuming it is an appropriate surface (interior, smooth, non-porous), the decal can be peeled away from the backing and slowly applied to the surface starting at the top of the decal and working down. The key to installing your decal is to move slowly so that you can peel small portions of it back up and reapply as needed to remove any air pockets or bubbles. Please note that unlike window and car decals you should NOT spray water onto the adhesive side of a wall decal. They are installed dry due to the fact that the low-tac adhesive allows for repositioning, which is what the water does when applying the semi-permanent window decals..
For larger decals we recommend having a second person help with the installation of the graphic. This will help ensure that the decal doesn’t stick to itself and will help avoid tearing when removing the decal from the backing and while positioning it on the wall.
Your trusted, custom signage provider.